Working principle£º The extruder is used for single mass extrusion. Mixed mass is put into hopper. Extrusion screws push mass into combination part where size mould is fixed for certain shape and size of rope. Chamber can be opened for cleaning. Size change can be easily achieved by replacing of size mould. Features; Infinite adjustment of extrusion speed via frequency converter; Water heating for extruder chamber and combination part ensuring extrusion stability; Speed and temperature control on panel; Technical data: Max. Capacity 15kg/h Rope size thickness 0~20mm Width 0~100mm Driven motor 1.1kw Heating power 2¡á6kw Power 3p£¬380v£¬ 50hz Working temperature 20~30¡æ Working humidity ¡ü55% Weight 250kg Size 1100¡á650¡á850mm
Used construction machinery, excavators, dozers, cranes, backhoe loaders, access platforms, boom lifts, dumpers, telescopic handlers.
We sell construction machinery, Excavators, Backhoe, Dragline Excavator, Bulldozers, tower cranes, sprinklers, sweepers, at low prices,
Sweeper sprinkler excavator
The extruder is equipped with three thermo-regulators with temperature display. All electric components and adjustment device are positioned at eye¡¯s level. All contactors, relays and fuses are installed in the control cabinet. 3. Technical data: Extrusion capacity:Max.600 kg/hour Number of candy ropes:2 colors 1-4rope(s) Extrusion screw dia:100 mm Infeed roller dia:110mm Motor power:2x7.5 kw Power for water-heating:3x6kw Motor protection:Ip 55 Speed adjustment range:1:27 Water consumption:300lt/hour Machine weight:2300 kg Overall dimension:2530¡á1570¡á1840mm
Technical Specifications : Exterior size :10030mm, 2230 mm, 2150mm Working plate size:2580mm, 1270mm inner size Suitable for cabinet, the width of PVC film should be 1400mm Maximum height of the work piece :50mm including bottom plate Rating working pressure: Positive pressure 0.6Mpa Negative pressure : -0.095Mpa General Power: 65kw Actual power consumption : About 15kw Weight :12.6T Top temperature:150 EPE film+preservative film, 3.25x2.25x2.05m+2.3x1.25x1.8m 12000kg.
The polyboll machine is customizable with different options as moulder cylinders with different bubbles size, third and fourth layer unit, automatic loader for pellets, etc.
The twin bubble machine allow to produce in-line (without further steps) an air bubble film for insulation applications composed of: two layer of air bubble film laminated with coated aluminium foil on the external side. The machine can produce, of course, air bubble film in 2 or 3 layers for the packaging market. The twin bubble system has the following characteristics: Two extruder for the production, at the same time, of the two layers of air bubble film and one, placed in the middle, for their lamination. Two interchangeable forming cylinders Rewinder with automatic cycle that allow to produce rolls from 25 up to 150 mt and more. Possibility to add two additional lamination unit by hot air in order to laminate a layer of foam in the centre of the material (between the two layers of air bubble film). Recommend for the air bubble film production for insulation market
The coex bubble plant, represents the state-of-the art machine among the torninovaÆs production range . It has got all the most sophisticated technologies for air bubble film production, in order to ensure the easy production to the customer, thanks to the full automation of the co-extrusion process, to reach a film with air-barrier effect, that keeps the air inside the bubble for a longer time. The main advantages of such air bubble film are: Better cushioning protection compared with a thicker mono-extruded bubble film: the co-extruded bubble film offers higher air retention (thanks to the internal layer of PA6) and then ensures effective long-term cushioning performances from packing to final delivery. It means also extra strength of each bubble and then extra protection of the goods. Better protection with thinner plastic film: it means better performance with less raw material consumption. Reusable : his long lasting cushioning performances allows to use the same air bubble film for many times. Recyclable : the co-extruded bubble film could be recycled with other polyethylene material An air bubble film of 35 g/,2, produced by co-extrusion process, can be compared, in terms of resistance, with a mono-extrusion air bubble film of 55 g/m2. They have same resistance. Considering such relationship, it means that you save the 30% of the cost for raw materials, by using co-extrusion production process. Mainly, it is composed by three extruders: one for PE layer, one for the PA6 layer and the third one for the TIE layer between PE and PA6. These three extruders, through the last generation of feed-blocks with adjustable geometry allow the production of the special co-extruded air bubble films with ABCBA structure. You can easily understand the co-extrusion process through the following layout: The COEX BUBBLE plant has got the following features: Extruders with a.c. motors mounted in axis and with universal screws in wear-resistant steel, with modular profiles with barrier double thread, in different diameters according to the level of production requested. Every extruder is equipped with a filter and a gear pump with transmission by cardan joint and motor with inverter and feedback loop control. The gear pump, through PID control, adjust automatically the speed of the extruder according to the capacity requested by the production formula and to the desired extrusion pressure. Two separated flat dies for an excellent control and adjustments of the produced films, realized in steel with adjustable deliveries. The feed-block with adjustable geometry, allows the distribution uniformity of the internal layer of polyamide (PA6) on the whole width of the film, also with thickness less than 0.5 micron. Gravimetric blending and metering for the ingredients, for a more accurate and automated management of the granules to be extruded. Forming unit climbed on guide and rack arms that allow the automated movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials delivery from the flat dies and for its fast interchangeability. Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant . The production control occurs by formula that the operator can personalize according to the co-extrusion percentage he needs and to the speed of production. The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature. Width of the produced film: from 1.000 mm up to 2.500 mm (or more on request) The plant can be equipped (also after installation, thanks to its modularity) with several accessories: Moulder cylinder with bubble in different diameters Perforation unit with brushless motor Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder Fast Loading system on the rewinder, that allows, in automatic way, to unload the produced roll with closing system by glue and the loading of the new carton core with application of ôhot-meltö glue. The machines are fully customizable. Contact us to project the most suitable plant for your production and market necessity.
Innovative make stretch wrapping machine, automatic shrink wrapping machine, pallet stretch wrapping machine, shrink wrapping machine, semi automatic shrink wrapping machine.
Building materials (ss steel, angles , rods, columns, etc), construction materials, machinery (cranes, truck, forklift, etc), stainless steel, gratings frp , hdpe , ss , hdg, ss rods, ss pipes, ss angles, ss hinges, black steel pipe, galvanised pipe, flat bar, mild steel flat bar, ss coils, steel coils, square bars, hexagonal bars, round solid bars, values, reducers, clamps, asbestos ropes, pulleys, bearing, mesh, steel bars, hollow bars, ss plates, iso gratings, ss310, ss316, ss304, nm plates, aluminium sheets, high gloss acrylic sheets, construction vehicles:, forklift, excavator, dump trucks, and tower cranes.
Nitrile gloves, face mask, diagnostic test kits, surgery supplies, laboratory supplies, dental supplies, ppe vending machines, hospitality supplies, kn95, sugar, rice, edible oil, beans, spices, crude oil, soybeans, toilet paper, paper towels.
Model: gh-6030az Power supply:380v 50hz 1phase/220v 60hz 3phase 2kw Height & length of in-feed conveyor:850¡à50/1500mm Tunnel size(1800,600,400mm( sf-6040e) Shrink film: pe pof pvc Max. Packing size : 700mm Packing speed: 6-14pcs/min Machine size(,:1360 x 2120 x 1900mm Packaging size(,:1420 x 2170 x2050mm Net/gross weight;490kgs/530kgs Application: The new desinged gh-6030az fully-auto sleeve sealing shrink packaging machine suits for shrink wrapping grouped and individual products, such as: book, magazines, cartons, plastic and glass container, pet bottles, pop-top cans, jars, wooden floor, doors, plywood, hardware and etc. Features: 1. Gh-6030az fully-auto sleeve sealing shrink packaging machine supply full-column or individual product shrink wrapping. It also suits for many layers products such as floor and magazines shrink packing; 2. Gh-6030az, which is piling, wrapping, sealing, shrinking, and cooling automatically. The whole working process adopts the german advanced technology based on european standard; 3. The electrical units are chosen from international famous companies such as airtac, siemens, omron, schneider; 4. Stainless steel heating elements assure long life span; shrinking temperature and conveyor speed are adjustable; 5. General-purpose application of shrink film pof, pvc, pe(polythene); 6. Conveyor unit has teflon mesh type or rod-shaped chain type for your choice; 7. Intelligent digital temperature controller, air-circulation heating system; 8. The packed goods are neat, compact and suitable for prolonged transport. Machine size(,:1360 x 2120 x 1900mm Packaging size(,:1420 x 2170 x2050mm Net/gross weight;490kgs/530kgs
Technical Specifications : Exterior size: 5800(Double plate 8800) mm, 1500 mm, 1400mm Working plate inner size: 2550mm, 1150 1300 mm (if producing the door, you choose 1150mm;if producing cabinet, you choose 1300mm) Maximum height of the work piece:50mmincluding height of Magnetic block or bottom plate Rating working pressure: -0.095Mpa General Power: 15kw Actual power consumption: about 5kw Weight: 2.5T Top temperature:180. EPE film+preservative film 3.2X1.8X2M 2500KG.
The demand to offer different productive solutions to its own customers, has allowed Torninova to apply its own technicall ability and experience in the production of air bubble film, in the production of machinery with in-line processing equipped with cast extruders (mono). The plant Power Bubble put together all the modern technologies and stand out for the following characteristics: Extruders with a.c. motor mounted in axis and controlled by inverter with nitrided steel barrier screws realized to plasticize and homogenize the material to extrude in different diameters according the request production capacity. Flat die with double delivery or separated flat dies for a good control and adjustments of the produced films, realized in steel with adjustable deliveries. Infrared Barrel Heating power saving up to 20%, long heater element life and quicker cooling response times Forming unit climbed on guide and rack arms that allow the automatized movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials deliver for the flat dies and for its fast interchangeability. Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant. The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature Produced air bubble film width from 1.000mm to 2.500mm (or more on request) The plant can be equipped (also in a second time thanks to its modularity) with various accessories: Forming cylinders with bubbles in different sizes Perforating unit equipped with brushless motor. Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder Gravimetric blending and metering for up to 4 ingredients for a more accurate and automated management of the granules to be extruded Ink-jet printing unit to personalize the material with logos and symbols