Introduction to the Product
These series products of nano titanium dioxide are independently developed by our corporation and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of less than 100 nm.
Nano titanium dioxide of our corporation has the properties of good transparency, and excellent absorbency to UVA and UVB, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Nano titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid.
Characteristics of the Product
HTTi-01 is a nano powder made of nano TiO2 mixed with some metal or metal oxide. Its crystal is anatase, and it may be used for producing photocatalyst. Under the illumination of light of less than 400 nm, the valence electrons of this powder are sent to the conduction band to put the electron and cavity in action with O2 and H2O absorbed on their surface and produce superoxide anion radicals. These radicals have the function of decomposing hazardous gas and organic pollutants through photo catalysis and antisepsis through photo catalysis, and can be widely used in air purification and sewage treatment. Moreover, this product is characterized by low cost, good stability, high photocatalytic activity and wide range of absorption of light wave. HTTi-01-W and HTTi-01-Mn has the highest catalytic activity, HTTi-01-N also has high catalytic activity. These products can be used in the field of decomposition the automobile exhaust, increasing fuel combustion efficiency and sewage treatment, etc.
Technical Index
Model: HTTi-01
Appearance: White powder
Content of titanium oxide (%): 99
Average of the grain size (nm): 10
Specific surface area (m2/g): 150
Crystal /surface treatment by: anatase
Characteristics: large specific surface, high photocatalytic activity
Model: HTTi-01-W
Appearance: White powder
Content of titanium oxide (%): 94
Average of the grain size (nm): 10
Specific surface area (m2/g): 100
Crystal /surface treatment by: anatase
Characteristics: highest photocatalytic activity
5/10kg/bag
Supplier: Manufacturers of dyes and pigments like ultramarine blue, malachite green, methylene blue, methyl violet, Red iron oxide , yellow iron oxides
Buyer: Sodium ferrocyanide, sulphur, coaltar pitch
Supplier: Iron oxide, zinc product, aluminum, rutile, ilmenite, struverite, monazite, etc
Buyer: Metal ores, zircon sand
Supplier: Brass, remelted zinc ingots, zinc dross, zinc ash, zinc oxide, lead dross, magnesium ingots, all grades, silicon metal, lead ore/ concentrate, zinc sulfide or zinc sulphide
Buyer: Zinc dross, zinc ash or skimming from hot dip galvanizing process, zinc fines, zinc die cast scraps, lead dross, brass and copper scraps
Introduction to the product These series products of nano titanium dioxide are independently developed by our corporation and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of less than 100 nm. Nano titanium dioxide of our corporation has the properties of good transparency, and excellent absorbency to uva and uvb, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Nano titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid. Characteristics of the product Htti-03-h and htti-04-h are made for cosmetics. The model of htti-03-h is hydrophilic, while htti-04-h is lipophilic. These products have very good characteristics of even granularity and more excellent absorbency to uva and uvb than sun organic screener. They are widely and safely used as inorganic sun screener in the cosmetics and well compatible with other raw materials. They are the ideal additive of the sunscreen, anti-ultraviolet rays cosmetics. Technical index Model: htti-03-h Appearance: white powder Content of titanium oxide (%): 88 Average of the grain size (nm): 30 Specific surface area (m2/g): 100 Crystal /surface treatment by: especially for cosmetics, hydrophilicity Characteristics:good transparency, clear blue light and has the ability to resist the ultraviolet ray Model: htti-04-h Appearance: white powder Content of titanium oxide (%): 85 Average of the grain size (nm): 30 Specific surface area (m2/g): 100 Crystal /surface treatment by: especially for cosmetics, lipophilicity Characteristics:idem 5/10kg/bag
Supplier: Chrome ore, manganese ore, limestone, dolomite, gypsum, bentonite, iron ore, molasses
NMCO is offering two types of Iron Oxides with differnt grades based on th WT% percent of iron oxides in the ore: Product - Iron Oxides Ore Specification A1) Red Hematite Ores where Fe2O3 WT.% is ranging from 55% to 65% A2) Red Hematite Ores where Fe2O3 WT.% is ranging from 75% to 80% B) Yellow Hematite Ores where FeO n(OH) WT.% is ranging from 55% to 65% Shipping mode - Containerized or Bulk Packing - As per client requirement Monthly capacity - 10,000 tons
Product description, including the following details - At our company, we always try to give the best quality Titanium Dioxide. We are known as the finest exporter in the market. We believe in providing and delivering the best services within the discussed time. We give a personalized touch to our services to create better relationships with our customers. Price of product - Price will decide at the time of Inquiry Bcoz it is depend on Quantity Requirement and Market Situation Key Specifications/Special Features - Titanium Dioxide Inorganic Salt, Agro Intermediate, Agriculture Fertilizers, Crop, Solvent, Food Ingredients, Fertilizers, Textile Chemical, Water Soluble Fertilizer, Agrochemicals, Inorganic Chemicals